Single Cylinder Diesel Engine Test Rig
Product Details:
X
Product Description
The setup consists of single cylinder, four stroke, Diesel engine connected to Eddy current for engine loading. The setup has stand alone type independent panel box consisting of air box fuel tank manometer fuel measuring unit, digital speed indicator and digital temperature indicator. Engine jacket cooling water inlet outlet and a calorimeter temperature is displayed on temperature indicator. Rotameters are provided for cooling water and calorimeter flow measurement.
The setup enables study of engine for brake power BMEP brake thermal efficiency volumetric efficiency specific fuel consumption air fuel ratio and heat balance. It is supplied with MS Excel program for Engine Performance Analysis
Features
- MS Excel sample calculation
- Digital non contact speed indication
- Digital temperature indication
- Digital load indication
- Box type manometer for air flow
- Rotameter for water flow
Range of Experiments
- Study of engine performance (Manual mode)
- Study of valve timing diagram
Specifications :
| Product | Engine test setup 1 cylinder 4 stroke Diesel |
| Product code | 225 |
| Engine | Make Kirloskar Model WI Type Single cylinder 4 stroke Diesel water cooled power 5.2 kW (7 BHP) at 1500 rpm stroke 110 mm bore 87.5 mm. Compression ratio 17.5-1 capacity 661 cc. |
| Dynamometer | Type Eddy current |
| Propeller shaft | With universal joints |
| Air box | M S fabricated with orifice meter and manometer |
| Fuel tank | Capacity 15 lit with glass fuel metering column |
| Calorimeter | Type Pipe in pipe |
| Temperature sensor | Thermocouple Type K |
| Temperature indicator | Digital multi channel with selector switch |
| Speed indicator | Digital with non contact type speed sensor |
| Load sensor | Load cell type strain gauge range 0-50 Kg |
| Load indicator | Digital Range 0-50 Kg Supply 230VAC |
| Rotameter | Engine cooling 40-400 LPH Calorimeter 10-100 LPH |
| Pump | Type Monoblock |
| Overall dimensions | W 2000 x D 2500 x H 1500 mm |
Utilities Required
- Electric supply 230 10 VAC 50 Hz 1 phase
- Water supply Continuous, clean and soft water supply 1000 1-PH at 10 m. head. Provide tap with 1 BSP size connection
Enter Buying Requirement Details
Other Products in 'Non Computerised Systems ' category
Contact Details
EDUTEK EQUIPMENTS (INDIA) PVT. LTD.
- 162, Vigyan Vihar, Delhi - 110092, India
- Phone :08037695755
- Email Us :edutek@gmail.com
- Manufacturing Unit :
C-63, Street No.8, Guru Vihar,.
Rahon Road, Ludhiana, Punjab, India
Mobile No: +919810106994
Send InquiryKey Personnel
- Mr Rajinder Kumar Jain (Director)
- Mobile :08037695755
Send Inquiry
Send SMSEDUTEK EQUIPMENT (INDIA) PVT. LTD.
All Rights Reserved.(Terms of Use)
Developed and Managed by Infocom Network Private Limited.
Developed and Managed by Infocom Network Private Limited.
