Evaporation Pressure Parallel Control Exp. Equip.

Some of the Features of our Evaporation Pressure Parallel Control Experimental Equipment are:-

1. Cycle composition: Compressor - Condenser - Receiver - Sight Glass - Filter Dryer - Solenoid Valve - Manual Expansion Value - Automatic Expansion Valve “ Low temperature Evaporator (installed a check valve at outlet) - High Temperature Evaporator (installed a E.P.R at outlet) - Accumulator - Compressor.

2. Being practicable to measure temperature at each of compressor inlet and outlet, condenser inlet and outlet, expansion V/V inlet and outlet, evaporator outlet, inside chamber, and outside using thermo couples of T-type, and of pressure: Being practicable to measure within the range of -1bar ~ 35bar at each of compressor inlet and outlet, condenser outlet, expansion V/V outlet, and evaporator inlet by pressure sensors which are installed.

3. Saving of data in every sec or min by excel program of MICROSOFT on
computer.

4. Experiment factors: Being practicable to calculate each factor of like as refrigeration effect, compressor work, condensing effect, evaporating latent heat, amount of flash gas at expansion V/V outlet, dry rate and humidity at expansion V/V outlet, and coefficient of performance in the abstract with temperature and pressure data which are measure.