Engine Test Setup 4 Cylinder  4 Stroke  Diesel

Engine Test Setup 4 Cylinder 4 Stroke Diesel

Product Details:


Product Description

Engine Test Setup 4 Cylinder  4 Stroke  Diesel

The setup consists of four cylinder, four stroke, Diesel engine connected to Eddy current/hydraulic dynamometer for engine loading. The setup has stand-alone type independent panel box consisting of air box, fuel tank, manometer, fuel measuring unit, digital speed indicator and digital temperature indicator. Engine jacket cooling water inlet, outlet and calorimeter temperature is displayed on temperature indicator.

Rotameters are provided for cooling water and calorimeter flow measurement. The setup enables study of engine for brake power, BMEP, brake thermal efficiency, volumetric efficiency, specific fuel consumption, air fuel ratio and heat balance. Set up is supplied with MS Excel program for Engine Performance Analysis.


  • MS Excel sample calculatiuon
  • Digital non-contact speed indication
  • Digital temperature indication
  • Digital load indication
  • Box type manometer for air flow
  • Rotameter for water flow

Range of experiments
Study of engine performance for power, efficiencies, fuel consumption, air fuel ratio and heat balance

Utilities required

  • Electric supply
  • Provide 230 +/- 10 VAC, 50 Hz, single phase electric supply with proper earthing. (Neutral – Earth voltage less than 5 VAC)
  • 5A, three pin socket with switch (2 Nos.)

Water supply

  • Continuous, clean and soft water supply @ 4000 LPH, at 10 m. head. Provide tap with 1" BSP size connection
  • Space: 3500Lx4000Wx2000H in mm
  • Drain: Provide suitable drain arrangement (Drain pipe 65 NB/2.5" size)
  • Exhaust: Provide suitable exhaust arrangement (Exhaust pipe 32 NB/1.25" size)

Foundation: As per foundation drawing

  • Fuel, oil
  • Diesel @10 liter
  • Oil @ 3.5 lit. (15W40)

Technical Specifications

  • Product: Engine test setup 4 cylinder,4 stroke, Diesel
  • Product code: 229, 229H*
  • Engine: Make Telco, Model Tata Indica, Type 4 Cylinder, 4 Stroke, Diesel water cooled, Power 39Kw at 5000 rpm, Torque 85 NM at 2500 rpm, stroke 79.5mm, bore 75mm, 1405 cc, CR22
  • Dynamometer: Product 229: Type Eddy current, water cooled Product 229H: Type hydraulic
  • Propeller shaft: With universal joints
  • Air box: M S fabricated with orifice meter and manometer
  • Fuel tank: Capacity 15 lit with glass fuel metering column
  • Calorimeter: Type Pipe in pipe
  • Temperature sensor: Thermocouple, Type K
  • Temperature indicator: Digital, multi channel with selector switch
  • Speed indicator: Digital with non contact type speed sensor
  • Load sensor: Load cell, type strain gauge, range 0-50 Kg
  • Load indicator: Digital, Range 0-50 Kg, Supply 230VAC
  • Rotameter: Engine cooling100-1000 LPH;Calorimeter 25-250 LPH
  • Pump: Type Monoblock
  • Overall dimensions: W 2000 x D 2750 x H 1750 mm